Brick Slip Tracking Sheet


Brick Slip Tracking Sheet

Suitable for internal and external projects on various substrates including brick, block, timber frame/SIPS and ICF. Used to increase the speed of brick slip installation on larger scale projects. Applications include refurbishments, conservatory wall panels, retail display walls and domestic feature walls. This tracking sheet is only suitable for 65mm to 68mm brick slips.

 

Sheet sizes:

  • 1200mm x 2400mm
  • 1200mm x 750mm

 

Make your selection using the drop down tab.

 

Sheets are 1mm thick, produced from recycled HIPS incorporating a tracking guide to aid the alignment of the brick slips. Can be cut with a pair of scissors and is ideal for affixing directly onto masonry with a suitable contact adhesive and mechanical panel fixings. 

 

Once fixed, brick slips are adhered using the foil pack adhesive available from our Brick Slips Store. When the adhesive is cured, brick slips can be pointed with a suitable pointing mortar, also available from our Brick Slips Store.

 

Purchase fixings from the fixings section below. For technical advice on installation and fixing options call 07825 304998.

 

£20.40

  • 1 kg
  • In Stock
  • Ships within 3-5 days

People who bought this also bought...



Buy Fixings Now

Fixings Advice

Stainless Steel Mudguard Washer
Stainless Steel Mudguard Washer

 

Used to spread the load at the point of fastening. 

 

E.g. if fixing tracking sheets to a wooden substrate, use M6 x 40mm diameter mudguard washer with an M5 stainless steel wood screw. Length of screw should be appropriate for the thickness of the backing substrate. 

Stainless Steel Woodscrew
Stainless Steel Woodscrew

 

Used to affix the tracking sheet to a wooden substrate.

 

Use in conjunction with a suitable stainless steel mudguard washer. E.g. if fixing to a timber substrate, use M5 wood screw with an M6 x 40mm stainless steel mudguard washer. Length of wood screw to be appropriate for the thickness of the backing substrate.

Countersunk Lightning Bolt
Countersunk Lightning Bolt

 

Used to affix the tracking sheet to a concrete substrate.

 

Use in conjunction with a suitable stainless steel mudguard washer. E.g. if fixing to a concrete substrate, use M6 x 50mm countersunk lightning bolt with an M8 x 40mm stainless steel mudguard washer. Length of lightning bolt to be appropriate for the thickness of the backing substrate.

36 fixings per 1200mm x 2400mm tracking sheet recommended.

 

IF IN DOUBT, SHOUT!

 

For advise on project specific fixing options call 07825 304998.